Share
Email
Print
Betco BetcoBest LM Floor Finish
- 40% less labor and requires half the coats compared to conventional finishes
- 50% higher gloss with fewer coats even with minimal burnishing
- Stripping is 50% quicker with faster removal
- Scuff-Resistant Technology resists black heel marks
- Coverage: 2,000 to 3,000 square feet per gallon
Checking for Also-Bought items, please wait...
Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE:
Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, medium to medium-heavy coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. 2 - 3 coats are recommended.
NOTE: This product contains an opaque application indicator that will clarify when drying. This is a self-sealing finish; however, if tile is old, worn or porous a Betco floor sealer can be used.
ROUTINE MAINTENANCE:
Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE:
Sweep large debris and dust mop the floor. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty container. NOTE: Slip resistance meets or exceeds (ASTM D 2047-11) James Machine 0.5 minimum.
- Floor
- Tile
- Hard Surface
- Powder Resistant
- Black Mark Resistant
- Scuff Resistant
- Heel Mark Resistant
- Crystal Clear
- Opaque
